(NewsUSA) â€“ Pioneering new product solutions can transform any bathroom from a water-and-money-waster to a water-and-cash-saver without sacrificing style or performance. Think that your bathroom doesnâ€™t offer a significant potential for cash savings? Think again. Letâ€™s do a little math with the help of the Water Savings Calculator (www.americanstandard-us.com/water-efficiency/) created by American Standard. Using an average residential cost of $6.06 per 1,000 gallons of water per year, consider this: * Install new 1.28-gallon-per-flush (gpf) high-efficiency toilets to replace older (pre-1990) 3.5 gpf toilets currently in your home. With the average toilet being flushed 12 times per day, replacing two older toilets saves $118 and 19,447 gallons of water per year. * Replace three 2.2-gallon-per-minute (gpm) faucets with 0.5 gpm WaterSense-labeled faucets and use them the same 40 minutes per day. The result: Save $451 and 74,460 gallons per year. * Swap out two 3.0 gpm showerheads for new 1.5 gpm models and save $265 and 43,800 gallons per year. Grab the calculator â€” in one year, the average household can save $834 and more than four swimming poolsâ€™ worth of water! Bulking up your wallet and saving water become all the more appealing when combined with a new generation of plumbing products that offer peak performance. Remember these product selection tips as you outfit a new, greener bathroom for your home: * Look for the WaterSense label. Created by the Environmental Protection Agency, this label certifies that products reduce water usage by 20 percent or more without sacrificing performance. The WaterSense label is currently available for high-efficiency toilets (HETs) and faucets. American Standard has the most high-efficiency toilets independently rated to flush more than two pounds of solids. All American Standard bathroom faucets are WaterSense-certified, and they comply with stringent new no-lead requirements. * Keep performance front and center when going green. The goal is conservation without sacrifice. Using as little as 1.0 gallon of water on the light setting, the H2Option Dual Flush HET scours the sides of the bowl with a strong push-and-pull siphonic action created by a forceful, but quiet, jetted action under the rim. The FloWise three-function showerhead has the option of a full 2.5 gallon flow rate, but an internal turbine also delivers invigorating sprays at lower water-use settings.
There are currently no comments on this post. Be the first one!